Great value used 20ft shipping containers available soon in Birmingham and Cannock.
The pictures shown are those of the exact containers that will be arriving within the next 2 – 3 weeks.
If using for export use, please tell us at time of ordering and we’ll make sure they have a valid CSC plate (minimum 6-months).
If you are using them for storage use, we can fit a lock box (padlock cover or cowl) for an additional £50.00 + VAT and supply one of our masterlock shipping container padlocks to suit for an additional £35.00 + VAT
All the containers will be thoroughly inspected and repaired (if required) upon arrival and will come with our standard 12-month wind & watertight guarantee if used for storage use, or a 6-months valid CSC plate if being used for export purposes.
All of the containers come with a solid marine ply floor, good working doors and fully intact door seals, All units are structurally sound and will be supplied in their original livery unless, you require an exterior re-spray. Having been used in the shipping industry, they will have some surface rust, scratches etc. consistent with their life in the industry and, in some cases, will have been professionally repaired to shipping line standards.
If you’d prefer a 20ft shipping container with flat panel doors, ask us about our range of 20ft refurbished shipping containers.
All of our containers are structurally sound and constructed using corten (COR-TEN A grade) steel (unless specified otherwise). COR-TEN steel is a special alloy of steel that, when rusted, the rust becomes non-porous thus protecting the metal beneath. This is the same steel alloy as used to produce Birmingham’s Iron Man – created by the famous artist Antony Gormley.
Please contact us for any inquiries or advice on this range of shipping containers or any others we have on our site.
Technical Information for 20ft shipping containers
Please note whilst we have tried to be as accurate as possible, some measurements (notably internal measurements) can vary slightly with the development and modernisation of manufacturing techniques over time. We recommend considering a circa 1 inch (2.5cm) tolerance. Where possible we have given a range on known variations in dims between ranges but we can’t guarantee this to be totally accurate for all ranges. If you have a specific sized problem or item to load that’s near these dims please double check with us in advance and if needs be we will get someone to measure the exact container for you.
|Height||8ft 6ins (2.59m)|
|Length||19ft 4ins (5.898m)|
|Width||7ft 8ins (2.33-2.35m)|
|Height||7ft 10ins (2.38-2.39m)|
|Width||7ft 8ins (2.33-2.38m)|
|Height||7ft 6ins (2.28m)|
|Floor Area||150sqft (13.93m²)|
|Cubic Capacity||1172 cu ft (33.18m3)|
|Weight||1.8-2.4 tons (1800-2400 Kgs)|
|Max Cargo (Export only)||21500 Kgs – 28,235 Kgs (Different max cargo weights available)|
|Width||1ft 2ins (360mm)|
|Height||4 1/2ins (115mm)|
|Centre to Centre||6ft 9ins +/- 2ins (2050mm +/- 50mm)|