Our refrigerated shipping container shelving range is made from food grade stainless steel and is ideal for use in hygiene important areas such as commercial kitchens, cold rooms, hospitals and refrigerated shipping containers.
Being made from stainless steel, our shelving is hygienic, easy to clean and being made from stainless steel it has a high resistance to corrosion.
Meets the requirements of HACCP as required by the Food Standards Agency. HACCP is the Food Standards Agency approved preventative food safety system that guides operators of food businesses to look at the methods they use to handle food stuffs and it introduces a range or procedures that ensures the food they produce is safe to consume.
To rack 2 sides of a 40ft refrigerated shipping container, the optimum shelving width is 900mm.
The internal length of a 40ft refrigerated shipping container is 11480mm meaning you’ll need a total of 12-shelving bays for each long side of the container. This will leave about 680mm of space at the door end of the container providing you start the racking off flush with the closed or non-door end of the container. To fill the gap across the non-door end of the container, you’ll need 1-bay of shelving that’s 1200mm wide. The depth of the shelving is 525mm. This will leave you with a 1.2 metre wide gangway between the shelving units when they are fitted down both sides of the container.
These kits are designed for use in refrigerated containers that are sat static on a site being used for storage. they are not designed for use when exporting goods in shipping containers. We also have kit 2 which offers shelving for both sides of the container (but not including the front end) and kit 1 which fills up one long side of the container only.
Please also be advised if you want to fill up the front end (non door end) of the container with shelving, its important to ensure any shelves or goods do not interrupt air flow from the heat exchangers / engine (assuming your container is operational) as vent locations can vary between containers we will need to ask you to take care on this as we can’t offer a blanket ‘fits all’ solution.
The cost to rack both sides and the non-door end of a 40ft refrigerated shipping container is £9,871.00 + VAT
Our stainless-steel shelving comes in three sizes complete with 4-shelves each bay.
Option 1 – 1800h x 900w x 525d (mm) – costs £394.00 per bay + VAT
Option 2 – 1800h x 1200w x 525d (mm) – costs £415.00 per bay + VAT
Option 3 – 1800h x 1500w x 525d (mm) – costs £519.00 per bay + VAT
Please call to check for availability.
All orders over £300.00 delivered FOC to England, Scotland (excluding the Highlands and Islands) and Wales.