2m x 2m Insulated Flat Pack Store

Product Description

Our galvanised, powder coated insulated 2m x 2m flat pack storage containers are an ideal solution for anyone looking for a small, yet secure, insulated storage solution and ideal for anyone looking for a unit to go into an awkward location that’s inaccessible for a normal shipping container.

Main features

Delivered flat packed allowing you to construct the unit in a location where a shipping container cannot be delivered.

Galvanised steel construction.

Fully insulated wall panels. Retains heat and minimises condensation.

Easy to assemble/disassemble; no special tools required, just a socket set.

You’ll need a minimum of 2 people to assemble this unit. However, through experience with these units, you may need to enlist another helper especially when it comes to lifting the roof into place.

Secure robust construction with a double locking system.

Ready to use within a couple of hours of receipt.

Three sizes are available.

Good range of accessories including levelling feet; forklift feet; door closer and more.

Modular design allows additional units to be linked together to create more storage space.

New guttering system built-in.

Available with a powder-coated finish as standard.

May be linked together to form a longer or wider unit.

Our 2m x 2m insulated flats pack storage unit measures 2010mm in length, 2148mm in width and 2180mm in height. When delivered, the unit measures just 300mm in height.

Our new range of flat pack insulated stores are fully portable and demountable making them ideal for a wide range of applications. These units provide good secure storage and come fully insulated against the cold to prevent condensation build-up making them ideal for storage of a range of products including power tools, paperwork and much more.

Our flats pack insulated stores are available in 2, 3 and 4m long variants and can be made even longer (or wider) by adding additional units of the same size using either our end or side linking kits. Please note, that units cannot be made wider and longer at the same time; it’s expandable in one direction only.

Lifting eyes included. Please note, that this unit cannot be lifted when loaded.

If you have linked units together, you can’t lift or re-position the units. Single (un-linked) units may be lifted using a forklift (with the forklift feet option) or top lifted by crane or similar (if using the lifting eye option). They cannot be lifted when loaded.

For demounting and relocating the units in their flat-packed condition, we suggest you only use the original packaging whenever possible. Most importantly keep the transport bolts handy for re-use if this is your plan.

The unit weighs 379kg.

The door width is 1250mm.

The door height is 1830mm.

Components and weights

Type of Panel	2m unit
Chassis	89kg
Side wall panel	37kg
End panel	38kg
Door panel	67kg
Roof panel	77kg
Outer corners	5.5kg
Inner corners	1.3kg
Lifting eyes	2.1kg

Construction materials

Floor – (pre-fitted) 18mm grade 3 OSB wooden flooring that’s screwed to a steel profile frame that has a galvanised finish.

Chassis – made from a combination of galvanised U and C channel steel.

Walls – the wall panels are made of an inner and outer galvanised steel skin that’s 0.4mm in thickness. The inner skin is finished with ‘off-white paint’ RAL code 9002 with the outer skin finished with a powder green coating with RAL code 6005. Between the inner and outer skin, the insulation is polyurethane that measures 40mm in thickness.

The paint has a 5micron primer beneath with the paint being some 20microns in thickness.

Roof – consists of an inner and outer skin that’s finished as the walls (above) and it too has a 40mm insulator between the inner and outer skin.

Door – Made of 0.6mm corrugated steel with the door being mounted into a steel frame with stainless steel hinges. The door is fitted with our improved 2-way locking system and optional padlock. The panel is insulated with glass wool fibre.

Lifting eyes – 4 lifting eyes supplied. Forklift feet extra.

Ideal uses for a 2m x 2m insulated flat pack store

Power tools and equipment storage

Storage for a temporary construction site.

Extra storage for businesses.

Storage for documents/archives.

Storage for building materials.

Storage for sports equipment.

Optional extras for insulated flat pack store​

​

Item	Picture	Price
Locking Bar with padlock		£60.00 + VAT
Rechargeable Lighting (1 unit) See our lighting video here		£49.00 + VAT
Forklift Feet (set of 4) See our forklift feet video here		£57.00 + VAT
Levelling feet (Adjustable / set of 4)		£40.00 + VAT
Door Closer		£45.00 + VAT
Touch-up Spray (blue or green)		£19.00 + VAT
Sumped Shelf 1000mm up-rights and arms extra See our Shelving video here		£30.00 + VAT
Sumped Shelf 1900mm up-rights and arms extra See our Shelving video here		£45.00 + VAT
Shelf Uprights		£20.00 each + VAT
Shelf Arms		£11.00 each + VAT
Short side linking kit		£110.00 + VAT

Uninsulated flat pack store

We also offer uninsulated flat pack storage units. If you’d prefer an un-insulated flat pack, you can see our 2m x 2m standard flat pack here. Our standard flat packs can be retrofitted with insulation as and when required.

Delivery

All prices quoted exclude delivery. To get a delivery price, please use our enquiries form here.

Deliveries are made on a rotating 2 – 3-week delivery cycle. For more delivery information, please click on the delivery tab above.

All prices quoted exclude delivery. To get a delivery price, please use our enquiries form here.

Deliveries are made on a rotating 2 – 3-week delivery cycle. For more information about delivery, please click on the delivery tab above.

Delivery

Insulated flat pack storage delivery information

All units are delivered on a shared load and are done depending on what orders are in your area at the time. We do try to accommodate delivery date requests but can never guarantee it.  Delivery times are Monday-Friday 8am – 6pm.

If delivery vehicle requires FOR’s registration then please state this before ordering as this will cost extra and will need to be quoted, if delivery Vehicle arrives on site and we haven’t been advised FOR’s is required then charges will apply.

Unless otherwise stated delivery includes lifting off on your site subject to good access and egress and sufficient room for crane vehicle to setup and offload. In the event that access/egress is not suitable aborted delivery charges will apply.

Flat packs can only be delivered to customers in mainland UK. We cannot deliver to the Channel Islands, Isle of Man, Orkney, Shetland, N.I, the Republic of Ireland and Scottish Islands, BFPO addresses, or the Republic of Ireland. All goods must be signed for by an adult aged 18 years or over on delivery.

Delivery charges and estimated timescales are specified when you place an order. We make every effort to deliver goods within the estimated timescales, however delays are occasionally inevitable due to unforeseen factors. Consultantsea Ltd, T/A Budget Shipping Containers shall be under no liability for any delay or failure to deliver the products within estimated timescales.

Risk of loss and damage of products passes to you on the date when the products are delivered or on the date of first attempted delivery by us.

Our delivery vehicle is a 26-tonne Hiab equipped vehicle that is 12.3ft in height and 34ft in length. On occasions, an additional 20ft long trailer may be attached to the vehicle. Please check your site can accept the longest vehicle configuration.

Should you have any access concerns, please send in pictures of the site with measurements and the delivery address so we can check access.

A failed delivery will be charged for, or we will drop the flat pack at a nearby location and you will have to manually move the unit panel by panel to the assembly point or re-deliver on a flat bed vehicle at additional cost and you will have to move the panels as suggested.

Collections

All collections of units must be made on flatbed trucks or trailers that have a larger footprint of the unit being collected. Failure to have the appropriate vehicle may result in being turned away.

Shelving guide for flat pack storage containers

Our shelving guide is designed to assist you in selecting the right number of shelving uprights and arms to suit the weight (UDL) per shelf that you require. Please note that the weight range for this shelving is 30 – 60kg UDL per shelf – UDL is Uniform Distributed Load. The shelves are sump shelves, designed to capture any leaks. The shelf uprights are the vertical supports that hold the shelf arms in place onto which, you place your sump shelves. The shelf uprights simply snap into place so, no need to drill holes in the unit. The maximum number of shelves that can be accommodated per pair of uprights is three. For both the 1000 and 1900mm shelves, you’ll need two shelf uprights per shelf and 2 shelving arms when storing 30kg UDL per shelf. For storage of 45kg UDL, you’ll need three shelf uprights and three shelf arms per shelf. And, for storage of 60kg UDL per shelf, you’ll need four uprights and four shelf arms per shelf.

Prices

Shelf uprights – £20.00 each Shelf arms – £11.00 each Sumped shelf (1000mm) – £30.00 each Sumped shelf (1900mm) – £45.00 each So, for 1-tier of 1000mm shelving you’ll need 2 x shelving uprights, 2 x shelving arms and 1 x 100mm shelf. This will cost 2 x £20.00 + 2 x £11.00 + £30.00 = £92.00.

Shelving configuration

For the 2 x 2m flat pack, you can only use the 1900mm wide shelves (1 per side and 1 x 1000mm at the closed end). For the 3 x 2m flat pack, you can use the 1000mm wide shelves (2 per side and 1 at the closed end). Or 1 x 1900mm shelf per side and 1 x 1000mm wide shelf and the 1000mm wide shelves at the closed end. For the 4 x 2m flat pack, you can use 3 x 1000mm wide shelves (3 per side and 1 at the closed end. Or 2 x 1900mm wide shelves per side, and 1 x 1000mm wide shelves at the closed end. The following tables provide you with the information you require for 1, 2 and 3-tiers of shelving covering UDL ratings of 30, 45 and 60kg per shelf.