2m x 3m Flat Pack Kiosk Container

Product Description

Our galvanized and powder-coated 3m x 2m kiosk flat pack containers are the ideal solution for those looking for a small but safe insulated storage solution that can be carried to difficult locations that are normally inaccessible. Ideal for those looking for a container that a regular old shipping container is unable to access.

This container kiosk is completely insulated with an outward opening fold-up hatch.

The flat pack kiosk measures 2m x 3m and can be expanded by adding a another kiosk of the same size to create a bigger working space.

Main features

Delivered flat packed allows you to construct the unit in a location where it is inaccessible by a normal shipping container.

Galvanised steel.

Entirely insulated wall panels. Traps heat and massively reduces condensation.

Easy to build/take apart; special tools are not required, just a socket set.

Typically takes an inexperienced person around 2 hours to build – faster with experience.

You’ll need a minimum of 3/4 people to assemble this unit.

Robust and secure construction with a double locking door system.

Can have a serving hatch on either side of the unit if required. Optional extra.

Hinged, upward tilting serving hatch.

Integrated gas struts on the hatch to hold it open.

Ready to use within a couple of hours of receipt.

Two sizes are available.

‘Snap-in’ shelving available.

Good range of accessories including levelling feet; forklift feet; door closer and more.

Modular design allows additional units to be linked together to create more working/storage space.

New guttering system built-in.

Available with a powder-coated finish as standard.

May be linked together with another kiosk unit or one of our insulated flat pack units to form a longer or wider unit.

Our 2m x 3m flat pack kiosk measures 2993mm in length, 2148mm in width and 2180mm in height. When delivered, the unit measures just 300mm in height.

Our new series of flat pack kiosks are fully portable and removable, making them ideal for a variety of uses. Perfect for use as catering kiosks, ticket kiosks, etc., these units are fully insulated from the cold and prevent condensation from forming, making them ideal for a variety of situations where a portable kiosk is required.
The Flat Pack Kiosk can be made longer (or wider) by adding units of the same size with end or side connector kits. The width and length of the unit cannot be changed at the same time. It is only expandable in one direction.

Lifting eye included. Please note that it cannot be lifted while it is loaded with luggage.

Units cannot be lifted or repositioned when connected to each other. Individual (un-linked) units can be lifted with a forklift (using the forklift foot option) or a crane or similar (using the lifting eye option). Cannot be lifted while loaded.

When transporting disassembled devices, we recommend using only the original packaging whenever possible. Most importantly, keep shipping bolts on hand for reuse if that’s your plan.

The unit weighs 488kg.

The door width is 1250mm.

The door height is 1830mm.

The kiosk hatch width is 2000mm

Components and weights

Fastening elements.

Range of optional extras

Dimensions

2148mm wide

2180mm high

2993mm long

300mm high when flat packed

Door height – 1830mm

Door width – 1250mm

Hatch width – 2000mm

Hatch height – 827mm

Construction materials

Floor – (pre-fitted) 18mm grade 3 OSB wooden flooring that’s attached to a steel fame that will have a galvanised finish.

Chassis – combines both galvanised U and C channel steel.

Walls – the wall panels are made of an inner and outer galvanised steel skin that’s 0.4mm thick. The inner skin is finished with ‘off-white paint’ RAL code 9002 with the outer skin finished with a powder green coating with RAL code 6005. Between the inner and outer skin, the insulation is polyurethane that measures 40mm in thickness.

The paint has a 5micron primer beneath with the paint being some 20microns in thickness.

Roof – consists of an inner and outer skin that’s finished as the walls (above) and it will have a 40mm insulator between the inner and outer skin.

Door – Made of 0.6mm corrugated steel with the door being mounted into a steel frame with stainless steel hinges. The door is fitted with our higher security 2-way locking system and padlock (Optional). The panel will be insulated with glass wool fibre.

Ideal uses for our 2m x 3m kiosk containers

Catering.

Retail.

Tourism.

Ticket office.

Information booth.

Site canteens.

Hide for wildlife observation.

Temporary visitor centre.

Optional extras for our 2m x 3m kiosk

Item	Picture	Price
Locking Bar with padlock		£60.00 + VAT
Rechargeable Lighting (1 unit) See our lighting video here		£49.00 + VAT
Forklift Feet (set of 4) See our forklift feet video here		£57.00 + VAT
Levelling feet (Adjustable / set of 4)		£40.00 + VAT
Door Closer		£45.00 + VAT
Touch-up Spray (blue or green)		£19.00 + VAT
Sumped Shelf 1000mm up-rights and arms extra See our Shelving video here		£30.00 + VAT
Sumped Shelf 1900mm up-rights and arms extra See our Shelving video here		£45.00 + VAT
Shelf Uprights		£20.00 each + VAT
Shelf Arms		£11.00 each + VAT
Short side linking kit		£120.00 + VAT
Long side linking kit		£130.00 + VAT

In addition to our kiosks, we also offer insulated and uninsulated flat pack storage units. These do not have serving hatches and can be seen in the ‘you may also like links below.

Delivery

All prices quoted exclude delivery. To get a delivery price, please use our enquiries form here.

Deliveries are made on a rotating 2 – 3-week delivery cycle. For more delivery information, please click on the delivery tab above.

Flat pack kiosk delivery information

All units are delivered on a shared load and are done depending on what orders are in your area at the time. We do try to accommodate delivery date requests but can never guarantee it.  Delivery times are Monday-Friday 8am – 6pm.

If delivery vehicle requires FOR’s registration then please state this before ordering as this will cost extra and will need to be quoted, if delivery Vehicle arrives on site and we haven’t been advised FOR’s is required then charges will apply.

Unless otherwise stated delivery includes lifting off on your site subject to good access and egress and sufficient room for crane vehicle to setup and offload. In the event that access/egress is not suitable aborted delivery charges will apply.

Flat packs can only be delivered to customers in mainland UK. We cannot deliver to the Channel Islands, Isle of Man, Orkney, Shetland, N.I., the Republic of Ireland and Scottish Islands, BFPO addresses, or the Republic of Ireland. All goods must be signed for by an adult aged 18 years or over on delivery.

Delivery charges and estimated timescales are specified when you place an order. We make every effort to deliver goods within the estimated timescales, however delays are occasionally inevitable due to unforeseen factors. Consultantsea Ltd, T/A Budget Shipping Containers shall be under no liability for any delay or failure to deliver the products within estimated timescales.

Risk of loss and damage of products passes to you on the date when the products are delivered or on the date of first attempted delivery by us.

Our delivery vehicle is a 26-tonne Hiab equipped vehicle that is 12.3ft in height and 34ft in length. On occasions, an additional 20ft long trailer may be attached to the vehicle. Please check your site can accept the longest vehicle configuration.

Should you have any access concerns, please send in pictures of the site with measurements and the delivery address so we can check access.

A failed delivery will be charged for, or we will drop the flat pack at a nearby location and you will have to manually move the unit panel by panel to the assembly point or re-deliver on a flat bed vehicle at additional cost and you will have to move the panels as suggested.

Collections

All collections of units must be made on flatbed trucks or trailers that have a larger footprint of the unit being collected. Failure to have the appropriate vehicle may result in being turned away.

Shelving guide for flat pack kiosk containers

Our shelving guide is designed to assist you in selecting the right number of shelving uprights and arms to suit the weight (UDL) per shelf that you require. Please note that the weight range for this shelving is 30 – 60kg UDL per shelf – UDL is Uniform Distributed Load. The shelves are sump shelves, designed to capture any leaks. The shelf uprights are the vertical supports that hold the shelf arms in place onto which, you place your sump shelves. The shelf uprights simply snap into place so, no need to drill holes in the unit. The maximum number of shelves that can be accommodated per pair of uprights is three. For both the 1000 and 1900mm shelves, you’ll need two shelf uprights per shelf and 2 shelving arms when storing 30kg UDL per shelf. For storage of 45kg UDL, you’ll need three shelf uprights and three shelf arms per shelf. And, for storage of 60kg UDL per shelf, you’ll need four uprights and four shelf arms per shelf.

Prices

Shelf uprights – £18.00 each Shelf arms – £10.00 each Sumped shelf (1000mm) – £28.00 each Sumped shelf (1900mm) – £45.00 each So, for 1-tier of 1000mm shelving you’ll need 2 x shelving uprights, 2 x shelving arms and 1 x 100mm shelf. This will cost 2 x £18.00 + 2 x £10.00 + £28.00 = £84.00.

Shelving configuration

For the 2 x 2m flat pack, you can only use the 1900mm wide shelves (1 per side and 1 x 1000mm at the closed end). For the 3 x 2m flat pack, you can use the 1000mm wide shelves (2 per side and 1 at the closed end). Or 1 x 1900mm shelf per side and 1 x 1000mm wide shelf and the 1000mm wide shelves at the closed end. For the 4 x 2m flat pack, you can use 3 x 1000mm wide shelves (3 per side and 1 at the closed end. Or 2 x 1900mm wide shelves per side, and 1 x 1000mm wide shelves at the closed end. The following tables provide you with the information you require for 1, 2 and 3-tiers of shelving covering UDL ratings of 30, 45 and 60kg per shelf.