6ft x 3ft Annexe Metal Shed/Container
This metal shed is one of the best-selling units in the range thanks to it being one of our range of galvanised sheds that has been awarded ‘Secured by Design’. Secured by Design was established in 1989 and is the title for a group of national police projects that focus on the design and security of homes, commercial premises and car-parks and has since expanded to encompass other projects and products that feature improved security features.
This particular shed has also been given an LPCB certification (Cert no. 596a/04) by the Loss Prevention Security Board meaning it is insurance approved. When purchasing a product that has received LPCB approval, you’re getting a product that will help to reduce incidents of property theft.
To gain this certification, the product has undergone attack using a variety of tools including levers, punches, spanners, pliers etc. In fact, a total of 21 different implements were used to make a break-in to the shed. All failed of course!
If you want a good solid secure unit for storing a range of garden tools and equipment then, this unit should meet your requirements.
Access to the unit is through a set of double doors with a door aperture of 3ft 10’’ by 3ft 9’’. The shed measures 3ft deep by 6ft wide by 4ft 7’’ at the rear. These are the external measurements.
As with all our galvanised units, there is an integral floor that has pre-drilled holes for the ground fixing anchors (supplied). The door has a tough, steel shrouded 5-point locking system that includes a drill and pick resistant lock.
The doors, door surround and hinges are all reinforced and designed to resist entry using a crow bar and the doors have 10mm steel bolts to further increase security.
To reduce the risk of condensation within the shed, the roof has discrete air vents that help air to circulate whilst preventing rain from getting in to the unit.
To protect the integral floor, a wooden OSB insert is available to purchase with the unit as are hooks, shelves and eyelets.
These units are UK designed and built and supplied with a 10-year manufacturer’s warranty.
These units are delivered as a set of individual panels (with all fixings, parts and instructions included). Care of the weight involved and the handling requirements they do not come packaged as a single item. Please note that you will require a flat, firm and level base for this storage container capable of taking the weight of the unit and anything you will load inside (we recommend a tarmac, concrete or stone base min 50mm / 2 inches thick).
*Orders to Scottish Highlands, remote areas of England and Wales will incur additional delivery as noted below:
- Aberdeen – £167.00 + VAT
- Argyll & Bute – £167.00 + VAT
- East Ayrshire – £167.00 + VAT
- Highlands – IV, HS, KA27-28, KW, PA20-49, PA60-78, PH17-26, PH30-44, PH49-50, ZE – £167.00 + VAT
- Inverclyde – £167.00 + VAT
- Moray – £167.00 + VAT
- Orkney – £417.00 + VAT
- Shetland – £667.00 + VAT
- Wigtownshire – £167.00 + VAT
Please check below for a range of additional fixtures available to go with the Annexe Metal Shed
|Eyelets (10 pack)||£10.00 + VAT|
|Full Width Shelf||£49.00 + VAT|
|Hooks (10 pack)||£20.00 + VAT|
|Wooden Floor (18mm)||£55.00 + VAT|
Please note – Due to continual product development, specifications may vary slightly from those shown in the images.