Our heavy-duty secure eBike storage unit can hold up to 3 electric hybrid bicycles within a ventilated galvanised steel shed that weighs some 122kg. Please check the size of your bikes before ordering!
Featuring heavy-duty double-doors to the front of the unit and a gas strut supported lid, access to your eBikes is really easy. The doors and lid are all secured with heavy duty locking shrouds and a door deadbolt.
The units integrated floor has pre-drilled holes to allow the unit to be secured to hard-standing using the ground anchors (included).
Within the unit, you can fit optional extras including shelving, hooks, a wooden sub-floor and electrics so you can charge your eBike’s battery. Please note, we do not provide the sockets or wiring to facilitate charging. This is a job for a qualified electrician. However, your unit will have a mounting plate on to which, your electrician can fit the socket and there is a hole with protective grommet at the bottom of the unit for the cable to pass through. Only use a qualified electrician to perform this installation. Images of sockets, wiring etc shown for illustrative purposes only.
Whilst most eBike batteries are fine in ambient temperatures, we do suggest you remove them from your eBike whatever the time of year, and we do recommend that in the colder months, you remove the batteries from your eBike and keep them indoors whilst storing your bike and/or re-charging the battery. As your supplier for further advice about how to look after your eBike’s battery, this is an expensive item to replace and you want to ensure you maximise the life of your battery.
Lead time is about 6 weeks from point of payment as all of these are made to order, lead times can be longer at peak times of the year.
Designed and built in the UK, this eBike storage unit comes with a 10-year manufacturer’s warranty and are available with a green, brown or ivory finish. Please specify your colour preference at time or ordering.
These units are delivered as a set of individual panels (with all fixings, parts and instructions included). Care of the weight involved and the handling requirements they do not come packaged as a single item. Please note that you will require a flat, firm and level base for this storage container capable of taking the weight of the unit and anything you will load inside (we recommend a tarmac, concrete or stone base min 50mm / 2 inches thick).
*Orders to Scottish Highlands, remote areas of England and Wales will incur additional delivery as noted below:
Aberdeen – £167.00 + VAT
Argyll & Bute – £167.00 + VAT
East Ayrshire – £167.00 + VAT
Highlands – IV, HS, KA27-28, KW, PA20-49, PA60-78, PH17-26, PH30-44, PH49-50, ZE – £167.00 + VAT
Inverclyde – £167.00 + VAT
Moray – £167.00 + VAT
Orkney – £417.00 + VAT
Shetland – £667.00 + VAT
Wigtownshire – £167.00 + VAT
|Easy Fit Half Width Shelf||£29.00 + VAT|
|Disc Padlocks||£19.00 + VAT|
|Hooks (5 pack)||£12.00 + VAT|
|Wooden Subfloor||£55.00 + VAT|
Please note – Due to continual product development, specifications may vary slightly from those shown in the images.