- 2246mm long x 2346mm wide x 2247mm high, flat pack chemical storage containers
- All fittings included
- Comes in separate panels, allowing access into the tightest of spots
- Weighs 482kg
- Very simple to assemble
- Galvanised Steel Construction with sumped floor (680 litres)
- 1900mm wide double locking door
- Can be returned to flat pack, moved and rebuilt if needed.
- Tools required to build: socket set and screwdriver!
How to Order
Call us free on 0808 1234 215 quoting product reference 4170 or request a callback.
We are open 8:30am – 5pm, Weekdays
Product Description
Our chemical store is delivered in flat pack form allowing you to locate and assemble the unit on otherwise difficult access areas. The units come complete with a sump and suspended floor grate and have optional ‘snap-in’ shelf uprights and arms to hold sump shelves.
Our flat pack chemical storage containers are ideal for storing batteries, paints, oils, lubricants and compressed gasses, or any hazardous chemicals in those hard to reach places where a rigid or articulated delivery vehicle couldn’t possibly get to offload a ‘regular’ chemical storage container.
Being flat-packed, this unit has become one of the most popular bunded chemical stores in the UK.
The unit comes with a suspended wire mesh floor atop a 680-litre bund with high and low positioned vents. The bund will contain spills, helping to avoid ground and ground water contamination, whilst the vents allow fumes/gases to vent freely out of the store.
This is a unit that is very cost-effective and cheaper than many other solutions on the market.
These flat pack chemical store units are supplied new ex-factory and are quick and easy to install and, for the quality, come in at an exceptional price. The strong profiled steel stores are manufactured in Galvanised steel for long life and feature a double locking system for added security.
The floor has a sump chassis base with suspended floor grate which has a standard 1000KG load capacity.
A protective power coated finish on the doors and the sump base is also included in the cost! – Red RAL3000 as pictured.
The roof section of the man-portable building has two integral gutters for effective rainwater dispersal to all four corners of the container. Unfortunately, these units are not fire rated due to the fact they are flat pack constructions.
If you need to move the container on-site, the unit can be lifted using a set of lifting eyes (included), even when the unit is loaded.
As your demand for chemical storage increases, you can add a further unit to your existing bunded container using one of our linking kits. Units of the same size can be linked together using either a short-end linking kit or a long-side linking kit. This really does offer superb flexibility at the fraction of the price of having additional building works done to make a larger chemical store.
Need a larger store than this one? See our 3m bunded chemical store or our 4m bunded chemical store.
Flat Pack Chemical Store Delivery
Delivery charges for flat pack storage containers to UK mainland addresses range from £100.00 – £300.00 depending on location and based on a part load (i.e. we try to group our deliveries together to keep the costs down for you) faster dedicated deliveries are available but will be costed individually. Access for a large rigid vehicle will be required and you will need to remove the item from our truck with by hand or with a fork lift. Collection available from our warehouse in Surrey if preferred.
Please contact us for more information or for an all-inclusive price or fill in our online quote form and we will reply with a firm quote for you.
Dimensions:
Length: 2.3m
Width: 2.1m
Height: 2.2m (Internal 1918mm)
2246mm (L) x 2346 (W). Weight: 482kg
Sump capacity: 680 litres
External height: 2247mm
Door width: 1900mm.
It is also possible to order bespoke sizes.
Weights:
Sump 124kg
Grate (set) 137kg
Short Side Panel 27kg
Long Side Panel 30kg
Door Panel 52kg
Roof 66kg
Corner Post 4kg
Container Weight 482kg
Technical Details:
Expandachem is an un-insulated closed volume demountable storage container. Assembly of the unit is simple, using the nuts and bolts supplied.
Features:
Finish – Galvanised with Powder Coated Doors
Length (mm) 2246
Width (mm) 2346
Height, flat packed (mm) 300 approximately
Height, assembled (mm) 2247
Weight (kg) 482
Door width (mm) 1900
Construction components:
The main construction elements of the hazardous store are as follows:
Chassis, including sumped base
Floor grate
Side wall panels
Roof panel
Double-door panels featuring the newly improved double locking system
Fastening elements
Floor
Sumped chassis base, with suspended floor grate.
The floor has a standard 1000KG load capacity
Side Walls & Roof Panel:
0.60 mm box profile galvanized steel panels. The panels have been strengthened with galvanized steel frame sections at the edges of each panel. The roof section of the man-portable building has two integral gutters for effective rainwater dispersal to all four corners of the container.
Door Panels:
0.60 mm box profile galvanized steel panel, with powder coated finish. The doors are mounted into the frame with stainless steel hinges. Complete with two 64mm Euro deadlocks with replaceable cylinders and a central roller catch. Double-Door width: 1900mm, hinged on the right and left, outward opening.
Fastening Elements:
Four 12 mm diameter rods are used to connect the roof to the chassis. These also form lifting eyes for use with a crane. Additional roof security bolts are supplied to prevent external access.
Packing:
All components of the Expandachem are specially packed to ensure that they are not damaged during transportation, loading and unloading under normal circumstances. The smallest transportation cube is achieved in this packing process.
Powder Coating:
The doors and sump are powder coated in red (RAL3000).
Fire Rating:
This unit is not fire rated due to its flatpack nature.
Our shelving guide is designed to assist you in selecting the right number of shelving uprights and arms to suit the weight (UDL) per shelf that you require.
Please note that the weight range for this shelving is 30 – 60kg UDL per shelf – UDL is Uniform Distributed Load.
The shelves are sump shelves, designed to capture any leaks. The shelf uprights are the vertical supports that hold the shelf arms in place onto which, you place your sump shelves.
The shelf uprights simply snap into place so, no need to drill holes in the unit.
The maximum number of shelves that can be accommodated per pair of uprights is three.
For both the 1000 and 1900mm shelves, you’ll need two shelf uprights per shelf and 2 shelving arms when storing 30kg UDL per shelf. For storage of 45kg UDL, you’ll need three shelf uprights and three shelf arms per shelf. And, for storage of 60kg UDL per shelf, you’ll need four uprights and four shelf arms per shelf.
Prices
Shelf uprights – £18.00 each
Shelf arms – £10.00 each
Sumped shelf (1000mm) – £28.00 each
Sumped shelf (1900mm) – £45.00 each
So, for 1-tier of 1000mm shelving you’ll need 2 x shelving uprights, 2 x shelving arms and 1 x 100mm shelf. This will cost 2 x £18.00 + 2 x £10.00 + £28.00 = £84.00.
Shelving configuration
For the 2 x 2m flat pack, you can only use the 1900mm wide shelves (1 per side and 1 x 1000mm at the closed end).
For the 3 x 2m flat pack, you can use the 1000mm wide shelves (2 per side and 1 at the closed end). Or 1 x 1900mm shelf per side and 1 x 1000mm wide shelf and the 1000mm wide shelves at at the closed end.
For the 4 x 2m flat pack, you can use 3 x 1000mm wide shelves (3 per side and 1 at the closed end. Or 2 x 1900mm wide shelves per side, and 1 x 1000mm wide shelves at the closed end.
The following table provides you with the information you require for 1, 2 and 3-tiers of shelving covering UDL ratings of 30, 45 and 60kg per shelf.
30kg UDL loading per shelf
1000mm shelving | 1900mm shelving | |
1-tier | 2 x shelving uprights | 2 x shelving uprights |
2 x shelving arms | 2 x shelving arms | |
1 x 1000mm shelf | 1 x 1900mm shelf | |
2-tier | 2 x shelving uprights | 2 x shelving uprights |
4 x shelving arms | 4 x shelving arms | |
2 x 1000mm shelves | 2 x 1900mm shelves | |
3-tier | 2 x shelving uprights | 2 x shelving uprights |
6 x shelving arms | 6 x shelving arms | |
3 x 1000mm shelves | 3 x 1900mm shelves |
45kg UDL loading per shelf
1000mm shelving | 1900mm shelving | |
1-tier | 3 x shelving uprights | 3 x shelving uprights |
3 x shelving arms | 3 x shelving arms | |
1 x 1000mm shelf | 1 x 1900mm shelf | |
2-tier | 3 x shelving uprights | 3 x shelving uprights |
6 x shelving arms | 6 x shelving arms | |
2 x 1000mm shelves | 2 x 1900mm shelves | |
3-tier | 3 x shelving uprights | 3 x shelving uprights |
9 x shelving arms | 9 x shelving arms | |
3 x 1000mm shelves | 3 x 1900mm shelves |
60kg UDL loading per shelf
1000mm shelving | 1900mm shelving | |
1-tier | 4 x shelving uprights | 4 x shelving uprights |
4 x shelving arms | 4 x shelving arms | |
1 x 1000mm shelf | 1 x 1900mm shelf | |
2-tier | 4 x shelving uprights | 4 x shelving uprights |
8 x shelving arms | 8 x shelving arms | |
2 x 1000mm shelves | 2 x 1900mm shelves | |
3-tier | 4 x shelving uprights | 4 x shelving uprights |
12 x shelving arms | 12 x shelving arms | |
3 x 1000mm shelves | 3 x 1900mm shelves |
We provide the above for guidance only.
Flat pack delivery information
All units are delivered on a shared load and are done depending on what orders are in your area at the time. We do try to accommodate delivery date requests but can never guarantee it. Delivery times are Monday-Friday 8am – 6pm
If delivery vehicle requires FOR’s registration then please state this before ordering as this will cost extra and will need to be quoted, if delivery Vehicle arrives on site and we haven’t been advised FOR’s is required then charges will apply.
Unless otherwise stated delivery includes lifting off on your site subject to good access and egress and sufficient room for crane vehicle to setup and offload. In the event that access/egress is not suitable aborted delivery charges will apply.
Flat packs can only be delivered to customers in mainland UK and Northern Ireland addresses. We cannot deliver to the Channel Islands, Isle of Man, Orkney, Shetland and Scottish Islands, BFPO addresses, or the Republic of Ireland. All goods must be signed for by an adult aged 18 years or over on delivery.
Delivery charges and estimated timescales are specified when you place an order. We make every effort to deliver goods within the estimated timescales, however delays are occasionally inevitable due to unforeseen factors. Consultantsea Ltd, T/A Budget Shipping Containers shall be under no liability for any delay or failure to deliver the products within estimated timescales.
Risk of loss and damage of products passes to you on the date when the products are delivered or on the date of first attempted delivery by us.
Our delivery vehicle is a 26-tonne Hiab equipped vehicle that is 12.3ft in height and 34ft in length. On occasions, an additional 20ft long trailer may be attached to the vehicle. Please check your site can accept the longest vehicle configuration.
Should you have any access concerns, please send in pictures of the site with measurements and the delivery address so we can check access.
A failed delivery will be charged for or we will drop the flat pack at a nearby location and you will have to manually move the unit panel by panel to the assembly point or re-deliver on a flat bed vehicle at additional cost and you will have to move the panels as suggested.
Collections
All collections of units must be made on flatbed trucks or trailers that have a larger footprint of the unit being collected. Failure to have the appropriate vehicle may result in being turned away.