Portable Toilets 5ft portable WC

  • 5ft portable toilet
  • All steel exterior construction
  • High quality insulation (A1- non flammable)
  • No chemicals required
  • Integrated heating and ventilation
  • Forklift pockets and lifting eyes included
  • Available in a range of standard RAL colours
  • Water heater
Price from: POA

How to Order

Call us free on 0808 1234 215 quoting reference 9916 or Request a Callback

We are open 8:30am – 7pm, Weekdays

Product Description

The portable range of toilets from Containex are robust single sex or multi sex WC’s include this 5ft unit that can be provided as a single unit through to multiple toilets for use on building sites, at events or to simply add additional capacity to your facility as and when needed.

The WC’s are connected direct to the water main and main sewer and do not use any chemicals.

Constructed of steel, with insulation, interior wipe clean surfaces and non-slip flooring, these robust units provide a good, comfortable solution for use at trade fairs, exhibitions and events.

The 5ft WC is an ideal solution for low volume use and can be supplied as male or female only or unisex depending on your needs whereas the larger units can be split use. For larger sites or events, multiple units can be provided.

Internally, the portable toilets feature easy to clean white wipe down surfaces, a WC, wash basin, lighting, extractor fan and non-slip, raised edge flooring to retain any spills.

Portable Toilet Design features

Flushing WC with water saving device

Auto shut off taps on the washbasins

Sink comes with an integrated water heater

Hygrostatic controlled ventilator

External water and waste connections

Mineral wool insulation to floor, ceiling and all walls

Disabled toilets

We can supply units with disabled facilities but, these are only available in toilets of 10ft and above. This is due to the lack of space in the 8 and 5ft units. that prevents us from fitting disabled facilities. Please check out other products for more info here if needed.

Portable Toilet Floor plan


Your site must have hard standing for our delivery vehicles to run over and must have space for an articulated vehicle of some 65ft in length. Our trucks and drivers may reasonably refuse to run over any soft ground or any surface where they risk damage or getting stuck.  If we can’t get access to the drop point, we’ll drop them as near as we can with you arranging for a forklift to move them into position using the integrated forklift pockets. Or, you lift the units using a crane and the integrated lifting eyes.

All portable toilets must be supported at all 4-corners with the top of these supports being at ground level. You must ensure that the supports are level along the length and width of the WC as well as across the diagonals. Failure to do so could result in the door(s) not opening and closing correctly.

You will need:

Electrical connection – you will need a qualified electrician to install electrics on your site for the light, heater, water heater and extractor fan.

Waste and freshwater connections – you will need access to a fresh water supply and a main sewer for waste water. We recommend you use a qualified plumber for this work.

A firm, flat and level surface to stand the units on.

We will need vehicular access for our delivery vehicle or we can drop them nearby and you can use either a forklift or crane to move the units into place.

For additional technical information, please click on the Technical Info tab (above).

Please feel free to call us to discuss your requirements on Freephone 0808 1234 215.

You may also like…

Back to top