Here we have a ready to go 15ft second hand shipping container customised as a workshop. repainted externally before being clad externally in 6×1 pressure treated timber this would be ideal on any site where a ‘shipping container’ may look too industrial! The timber cladding has been finished with trim on the top rails as well as the corner posts.
The doors are also cladded leaving the upper door beam on show and the corner edges but as neat as possible (this is left exposed for usability.) The right door has 2x deadlocks with keys to open them as appose to usual locking bars, which can be stiff on day-to-day use, as well as 2x spring bolts on the left door to stop it swinging open on its own when not in use.
To eradicate condensation the unit has been insulated with 25mm kingspan and lined internally with 11mm OSB. Along with a 12mm ply floor overlay with finishing skirting on the floor.
There is an 18mm ply ‘L’ shaped workbench too with key-clamp style legs – very heavy duty. Complete with electrics, workshop spec metal sockets and switches: 3x doubles at counter height, 1x switch, 2x strip lights, 1x heater, 1x RCD, 1x blue plug externally for hooking up upon arrival. This unit is ready to plug in and play!
Also, as the corner casting and any previous lifting points have been cladded over we’ve fitted lifting eyes on top rail (for top chain lifting) as well as lifting lugs on bottom rails (for bottom chain lifting) so there should be issue us delivering with one of our hiab crane equipped vehicles.
The unit is in Manchester but we can offer delivery to any site (Subject to suitable vehicle access) – as this is currently in Manchester depot it will fit best for customers within 30 miles or so (Stockport, Rochdale, Bolton, Wigan, Warrington, Blackburn, Huddersfield, Macclesfield, Preston, Chester or Liverpool locations are ideal. Also Yorkshire, Lancashire, The Midlands, Derbyshire, Nottinghamshire etc. are not out of the question of still being very cost effective compared to other options.)